, ,

MAX6675 Module + K Type Thermocouple

Availability:

In stock


450

In stock

This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit reolution providing temperature readings from 0°C to 1024°C (max temperature of supplied sensor is 450°C) with a resolution of 0.25°C. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board.

Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. Total length of sensor including cable and spade connectors is ~100cm.

MAX6675 Module Pinout:

The pin-outs for this module are as follows:

SO: The module’s serial output.   Your Arduino will read this output.

CS:  Chip Select.   Setting low, selects the Module and tells it to supply an output that is synchronize with a clock

SCK : The Serial Clock… an input from your Arduino.

VCC: 5V supply

GND:  Ground.

– (or Minus):   The K thermocouple minus input.

+ ( or Plus):  The K Thermocouple plus input.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

DO YOU NEED ASSISTANCE?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    CONTACT US