,

HC-06 Bluetooth Module for Arduino

Availability:

Out of stock


480

Out of stock

HC-06 is a Bluetooth module designed for establishing short range wireless data communication between two microcontrollers or systems. The module works on Bluetooth 2.0 communication protocol and it can only act as a slave device. This is cheapest method for wireless data transmission and more flexible compared to other methods and it even can transmit files at speed up to 2.1Mb/s.

HC-06 uses frequency hopping spread spectrum technique (FHSS) to avoid interference with other devices and to have full duplex transmission. The device works on the frequency range from 2.402 GHz to 2.48GHz.

Pin Name Function
1 Key The pin state determines whether the module works in AT command mode or normal mode

[High=AT commands receiving mode(Commands

response mode), Low or NC= Bluetooth module normally working]

2 Vcc +5V Positive supply needs to be given to this pin for powering the module
3 Gnd Connect to ground
4 TXD Serial data is transmitted by module through this pin (at 9600bps by default), 3.3V logic
5 RXD Serial data is received by module through this pin (at 9600bps by default),3.3V logic
6 State The pin is connected to the LED on the board to represent the state of the module

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

DO YOU NEED ASSISTANCE?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    CONTACT US