,

74HC164 8bit Serial-In / Parallel-Out Shift Register

Availability:

In stock


Tonomech offers 74HC164 8bit Serial-In / Parallel-Out Shift Register.

30

In stock

74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry through the other input. A LOW on the master reset input (MR) clears the register and forces all outputs LOW, independently of other inputs. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. These 8-bit shift registers feature AND-gated serial inputs and an asynchronous clear (CLR) input. The gated serial (A and B) inputs permit complete control over incoming data; a low at either input inhibits entry of the new data and resets the first flip-flop to the low level at the next clock (CLK) pulse. Data is shifted on the LOW-to-HIGH transitions of the clock (CP) input. A high-level input enables the other input, which then determines the state of the first flip-flop. Data at the serial inputs can be changed while CLK is high or low, provided the minimum set-up time requirements are met. Clocking occurs on the low-to-high-level transition of CLK.

Features:

  • Wide Operating Voltage Range of 2 V to 6 V
  • Outputs Can Drive Up to 10 LSTTL Loads
  • Low Power Consumption, 80-µA Maximum ICC
  • Typical tpd = 20 ns
  • ±4-mA Output Drive at 5 V
  • 8-bit Gated Serial Inputs with Asynchronous Clear
  • Clocking Occurs on the Low-to-High Transition of the Clock Input
  • Data at the Serial Inputs can be Changed on High or Low State of the Clock
  • Standard TTL Switching Voltages
  • Superseded, Not Recommended for New Designs
  • Typical operating frequency: 50 MHz
  • Typical propagation delay: 19 ns (clock to Q)
  • Wide operating supply voltage range: 2V to 6V
  • Low input current: 1 µA maximum
  • Low quiescent supply current: 80 µA maximum
  • Fanout of 10 LS-TTL loads
  • Package type: DIP
  • No. of pins: 14

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

DO YOU NEED ASSISTANCE?

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X
    CONTACT US